TeeJet Drift Guard (DG) Nozzles produce a larger droplet that helps reduce drift. These TeeJet nozzles offer a flat fan spray pattern.
Drift Guard Nozzles have a stainless steel core and a removable pre-orifice for longer life.
The printing on all nozzles indicates the angle and capacity. Always refer to nozzle chart to verify angle and capacity.
The nozzles that start with "80" indicate an 80 degree spray width. The nozzles that start with "110" indicate a 110 degree spray width.
With 80 degree nozzles, if you space the nozzles 20" apart, and 30" above the spraying surface you will have perfectly even coverage. With 110 degree nozzles, if you space the nozzles 20" apart and 20" above the spraying surface you will have perfectly even coverage.
- 100 Mesh Strainer for the DG80015-VS and DG110015-VS
- 50 Mesh Strainer for all remaining DG nozzles
Nozzle Cap Recommendations for automatic spray alignment:
- Quick TeeJet Cap CP25611
- Quick TeeJet Cap CP25612-1-NYR with gasket
- Threaded Brass Nozzle Cap CP1325
- Threaded Nylon Nozzle Cap CP8027-NYB
Please see Related Products for more information on nozzle caps and strainers.
For more information regarding Drift Guard Nozzle capacities, please view the Capacity Chart in the Resources section.