Overview
Best for Pre-Emerge surface applied herbicides. Minimum pressure of 40 psi. Best for Post-Emerge contact herbicides typical pressure 80 psi or higher. Available in 80 degree or 110 degree flat fan spray patterns to suit your spraying needs.
Teejet Air Induction Nozzles
Prices are in US Dollars.
Overview
Best for Pre-Emerge surface applied herbicides. Minimum pressure of 40 psi. Best for Post-Emerge contact herbicides typical pressure 80 psi or higher. Available in 80 degree or 110 degree flat fan spray patterns to suit your spraying needs.
Product Description
The TeeJet Air Induction Nozzle is the best nozzle for Pre-Emerge surface applied herbicides at a minimum pressure of 40 psi. In addition, this nozzle is recommended for Post-Emerge contact herbicides at typical pressures of 80 psi or higher.
- Stainless steel orifice.
- Provides air filled droplets that are large and drift resistant.
- 80 degree or 110 degree flat fan spray pattern.
- Fits in standard Teejet Nozzle Body.
- Sizes from 0.15 to 0.50 gpm @ 40 psi.
Strainer Recommendations:
- Note: Because of the construction of these nozzles, only slotted strainers (4514-10, for example) work with the Air Induction nozzles
- 100 Mesh Strainers only for the AI110015-VS nozzle
- 4514-10 Strainers for all remaining Air Induction nozzles
Nozzle Cap Recommendations for automatic spray alignment:
- Threaded Brass Nozzle Cap CP1325
- Threaded Nylon Nozzle Cap CP8027-NYB
- Quick TeeJet Cap CP25597-1-NY
- Quick TeeJet Cap CP25598 with gasket
Please see Related Products for more information on nozzle caps and strainers.
In the Resources section, you will find a Capacity Chart for the TeeJet Air Induction Nozzles.