Xtreme Electric PTO Clutches for John Deere Mowers
Prices are in US Dollars.
Overview
These Stens Xtreme Electric PTO Clutches work on John Deere and Scotts mowers.
Product Description
These Stens Xtreme Electric PTO Clutches are OEM replacements for John Deere and will fit various John Deere and Scotts mowers. Not only can they be used to replace PTO clutches for John Deere, but they can be used for replacing some Warner, Ogura, and Xtreme PTO Clutches as well.
The Xtreme line of electric PTO clutches by Stens feature a number of improvements, including:
- Cool coil technology - runs over 20% cooler than competitive clutches. Electromagnetic clutches run very hot, up to around 220° F. Xtreme composite coils run around 175° F. Less heat means extended life.
- High temperature bearing upgrades OR FatBoy bearing upgrades - high temperature bearings use a special blend of grease rated two times more than what is required for extended bearing life. Since high temperatures and vibration are tough on bearings, all Xtreme clutches use this blend of high temperature grease for extended bearing life. FatBoy bearings have an increased size to improve bearing life. Since the number one failure in a lawnmower clutch is the pulley bearing, the FatBoy uses top grade bearings and a replaceable pulley bearing.
- Replaceable pulley bearings - since the pulley bearings can eventually wear out, the Xtreme design offers replaceable bearings (not all clutches have this feature).
- Super smooth "Xtreme Precision" machined pulleys - result in stronger, quieter, smoother performance, while maintaining stable and faster blade speeds. These type of pulleys are used on Nascar engines since they don't spread under load like cheaper formed pulleys. If a formed pulley spreads, the belt will sink deeper into the groove, lowering belt speed and slowing down blades.
- Integrated, watertight, impact-resistant wire harnesses - Xtreme clutches have integrated watertight connections with three layers of protection at the clutch body instead of flimsy plastic connectors with exposed wires.
The direction of these Stens Xtreme PTO Clutches are either counterclockwise (CCW) or clockwise (CW). Each of these PTO clutches use either a 1/2" or 5/8" belt width.
Part # | Replaces John Deere OEM # | Replaces Warner / Ogura # |
Replaces Xtreme # | ID | Pulley Diameter | Direction | Uses Belt Width |
---|---|---|---|---|---|---|---|
255-001X | GY20108 / GY20652 / GY20878 / GY21340 Fits 145, 155C, 190C, L120, L130, LA130, LA140 lawn tractors ; Scotts L2048, L2548 |
5219-20 5219-73 |
X0424 | 1" | 6 5/16" | Counterclockwise | 1/2" or 5/8" |
255-136X | AM123123 | 5215-34 | X0179 | 1 1/8" | 5 1/2" | Counterclockwise | 1/2" or 5/8" |
255-137X | AM100979 / AM115090 / AM118969 / AM122969 Fits 108-111, 112-L, 1116-130, 160-165, 175 ; LX172, LX173, LX176 ; STX30, STX38 with yellow decks |
5215-35 | X0407 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-139X | AM103035 / AM108601 / AM115093 / AM119536 | 5215-44 | X0406 | 1 1/8" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-141X | AM121972 Fits STX38, STX46 (serial # 270,001 and higher) |
5217-8 5217-20 5217-36 5217-38 |
X0007 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-142X | AM126100 Fits LX255, LX266, LX277, LX279, LX280, LX288 lawn tractors |
5219-1 | X0327 | 1" | 5 7/16" | Counterclockwise | 1/2" or 5/8" |
255-145X | TCA14535 Fits Mini Frame 717, 717A, 717E, 727, 727A, 727E Z-Traks |
5219-32 | X0353 | 1 1/8" | 6 5/16" | Counterclockwise | 1/2" or 5/8" |
255-146X | GDA10017 Fits 647-657, 667 QuikTraks ; 717, 727 Mini Frame Z-Traks ; 717 Z-Traks |
5219-4 | X0359 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-153X | TCA16998 / TCA19813 Fits Z520A, Z720A, Z810A, Z820A, Z910A, Z920A, Z925A ZTraks |
5218-245 | X0259 | 1 1/8" | 6 3/8" | Counterclockwise | 1/2" or 5/8" |
255-387X | D1800 | 5215-14 | X0168 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-431X | 717-3446P / 717-3446 / 917-3446 | 5218-29 | X0037 | 1" | 6" | Counterclockwise | 1/2" or 5/8" |
255-511X | AM119683 Fits STX38 and STX46 (serial # 270,000 and lower with black decks) |
5217-6 5217-7 5217-9 5217-35 |
X0003 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-829X | AM118970 / AM123285 / AM130328 | Ogura GT1-JD08 |
X0410 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-831X | AM131779 Fits 325, 335, 345, GX335-GX345, GX355 diesel (serial # 120,000 and lower) |
Ogura MA-GT-JD23BF |
X0411 | 1 1/8" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-847X | AM134397 / AM141536 Fits Z425, Z445 Z-Traks (serial # 040,000 and lower) ; X300, X300R, X304, X310, X320 |
5219-62 5219-87 5219-127 |
X0383 | 1" | 5 1/2" | Counterclockwise | 1/2" or 5/8" |
255-871X | TCA12522 Fits 737, 757, 777, 797 Z-Traks |
5218-91 | X0325 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |