Replacement Air Filters for Briggs & Stratton Engines. Not Shown by hp
Overview
Product Description
Rittenhouse carries the Stens line of replacement air filter for Briggs & Stratton engines. It is wise to change your air filter every 25 hours of use or once a year, especially when working in dirty or dusty conditions. Always pre oil if recommended by manufacturer and always replace filter when damaged or worn out. The purpose of an air filter is to deliver high air flow while still protecting the engine blocking dirt and particles from entering. Having a clean air filter allows your engine and equipment to run at full performance without losing horsepower or torque. These Air Filters will keep your equipment running smoothly for the season!
The table below shows filters that are not grouped by HP. Some show models used on and some show type of engine. If you know the HP of your engine please refer to the category listing Replacement Filters by HP as it is probably not listed in this table.
| Part # | Replaces Briggs OEM # |
Model Used On | Notes |
|---|---|---|---|
| 100-131 | 392642, 394018, 394018S, 4135, 5050B, 4135, 5050H | L-Head Twin horizontal & V-Twin Vanguard engines 290000, 294000, 303400, 303700, 303900, 350700, 350400, 351400, 351700, 400400-422400 |
Do not use this filter on industrial concrete saws 5 5/8"ID x 7"OD x 2 1/4"H Uses 100-743 pre filter |
| 100-743 | 271271, 272490S, 272490, 4111, 5052H, 5052K | Same as above | Pre Filter for use with 100-131 & 100-164 |
| 100-533 | 820263 | 385777, 386442, 386446, 386447 | 1 3/4"ID x 3 1/2"OD x 7 3/8"H Uses 100-541 inner filter |
| 100-541 | Same as above | Inner filter for use with 100-533 | |
| 102-305 | 841497 | 540000, 610000 series | 2 1/2"ID x 4 1/8"OD x 10 3/4"H Uses 100-780 inner filter |
| 100-780 | 821136 | Same as above | Inner filter for use with 100-780 |
| 100-929 | 793569 | 31L777, 31M977, 31Q777, 3317007, 331777, 331807, 331877, 33M677, 33M777 |
1 1/2"ID x 3"OD x 5 7/8"H Uses 100-907 pre filter |
| 100-907 | 793685 | Same as above | Pre filter for use with 100-929 |
| 102-119 | 692519 | V-twin Vanguard engines | 5 1/2"ID x 7 3/4"OD x 2 1/4"H Uses 102-664 pre filter |
| 102-664 | 692520 | Same as above | Pre filter for use with 102-119 |
| 102-875 | 795115, 697634, 697014, 698083, 697153, 5077 | Intek AVS engines 286H77-0121, 284H07, 284H77, 285H77, 31E707, 31E777, 31F777, 31G777, 31H777, 31P677 |
3 3/16"W x 9"L x 1 1/2"H Uses 102-871 pre filter |
| 102-871 | 697015 | Same as above | Pre filter for use with 102-871 |
| 102-847 | 794071 | 600 Series | 4"W x 4 5/8"L x 1 1/4"H 1 1/2"ID |
| 100-632 | 698369 | 9B902, 98902, 98982, 10A902, 10B902, 10A982 | 2 7/8"W x 5 1/8"L x 1 1/4"H |