Overview

A 12V diaphragm pump that enables quick replacing of pump heads thanks to its patented Quick Change design.

Delavan Quick Change 12V Demand Diaphragm Pump 5936-107E

Delavan QC Demand Pump QA 3.6hpm
CAD $193.38
  • SKU: 5936-107E
Delavan Replacement Pump Head Demand 3.6gpm
CAD $116.03
  • SKU: PHA-5936-107E
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Sezzle
Prices are in Canadian Dollars.

Overview

A 12V diaphragm pump that enables quick replacing of pump heads thanks to its patented Quick Change design.

Product Description

Quickly change pump heads during repairs in order to minimize downtime during your spraying operation with this Delavan Quick Change 12V Demand Diaphragm Pump 5936-107E.

No more having to delay your spraying operation when your diaphragm pump requires a replacement pump head because the patented Quick Change design on these Delavan diaphragm pumps enable you to change pump heads in 60 seconds or less. The quick and easy tool-free method of changing pump heads can be achieved quickly by removing the socket head screw, twisting the pump head to remove it from the motor, connecting the pressure switch to the motor, connecting the flag connectors, and twisting on the new pump head and securing the bolt.

The Delavan 5936-107E Quick Change Demand Diaphragm Pump can be used on small-to-medium sized sprayers, boom sprayers, and wand sprayers for marine and RV applications, fluid transfer applications, agricultural spraying, spot spraying, weed and pest control, lawn / turf spraying, soft wash, and much more. The pump's Santoprene diaphragm and Viton valves provide great chemical resistance, enabling you to pump a range of general use agricultural chemicals, such as liquid fertilizers, herbicides, pesticides, insecticides, and other hard-to-handle fluids.

Powered by a high-torque 12-volt DC electric motor with wire leads and a 2-pin molded connector. The 12V motor provides powerful flow at ideal pressures to ensure smooth and even coverage in your application.

Demand Pumps have a built-in pressure switch that automatically stops and starts the pump at specific pressure settings. When a faucet or valve opens, line pressure decreases causing the demand switch to automatically start the pump. When the valve shuts, line pressure increases causing the demand switch to automatically turn off the pump. The demand switch activates in response to the pump's outlet pressure at a predetermined and preset pressure.

Delavan Replacement Pump Head # PHA-5936-107E available and sold separately.

Specifications:

  • Pump Type: Demand
  • Max. Flow: 3.6 gpm
  • Max. Pressure: 60 psi
  • Max. Draw: 11 amps
  • Max. Fluid Temperature: 140° F
  • Port Sizes: 3/4" Quick Attach
  • Power: 12V DC electric motor with wire leads and 2-pin molded connector
  • 5 chamber positive displacement pump
  • Polypropylene housing
  • Santoprene diaphragm
  • Viton valves
  • Stainless steel fasteners
  • Self-priming up to 14'
  • Can be run dry
  • NSF Approved
  • Weight: 8 lb.

Quick Change Demand Diaphragm Pump Instructions:

  1. Disconnect electrical connections to the pump.
  2. Remove the two flag connectors from the pressure switch.
  3. Remove the thumb screw from the pump head.
  4. Twist and remove the pump head from the motor body.
  5. Locate the straight spot on both the motor and replacement head.
  6. Put the pump head on the motor shaft and rotate until the set screw holes are beside each other.
  7. Push on the pump head until it is flush with the motor and twist counterclockwise until it stops.
  8. Insert thumb screw.
  9. Locate the top and bottom electrical terminals of the pressure switch.
  10. Connect the flag connectors and leave the center connector empty.
  11. Reconnect power to the pump.

Related Products