Overview

Delavan 5800 PowerFlo Series 12V DC pumps provide flow rates of 5 GPM (18.9 LPM).

Delavan Powerflo 5800 Series Diaphragm Pumps

Delavan 12 VDC 5850-111E Pump
CAD $199.36
  • SKU: 5850-111E
Delavan 5850-201E 12 VDC Powerflo Pump
CAD $151.68
  • SKU: 5850-201E
Everflo Wire Harness
CAD $27.68
  • SKU: 33-103233
Everflo Wire Harness
CAD $26.11
  • SKU: 33-103260
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Sezzle
Prices are in Canadian Dollars.

Overview

Delavan 5800 PowerFlo Series 12V DC pumps provide flow rates of 5 GPM (18.9 LPM).

Product Description

These Delavan 5800 Series PowerFLO Diaphragm Pumps replace the FIMCO spray pumps used on FIMCO ATV, Utility and Spot Sprayers. They are widely used in fluid transfer applications, as well as agricultural spraying applications.

Delavan PowerFlo 5800 Series are 5 chamber diaphragm pump and 12-volt DC motor combinations. The motors are permanent-magnet, totally enclosed and non-ventilated. They have priming capabilities of 14' (4.3 m).

Each of the Delavan PowerFlo Pumps we have listed here – 5850-111E and 5850-201E – have 12 V DC motors, Santoprene diaphragms, Viton valves and 1/2" (13 mm) FNPT ports. The housings are polypropylene and the fasteners are stainless steel. The Delavan 5850-111E is a bypass pump, while the 5850-201E is a demand pump and includes a pressure demand switch which only operates when liquid flow is required.

Demand Pumps require a balanced flow. Too small of a nozzle, whether on your spray gun or on your spray boom, may restrict the flow resulting in your demand pump shutting off. Bypass Pumps can be used in applications which would normally result in frequent stopping and starting of the motor. Pump models with an internal bypass are designed to pump at a high pressure with low flow rates.

We recommend using the AA122-1/2-PP Poly Line Strainer (see Related Products) to help eliminate contaminates from running through your demand or bypass pump. Bypass pumps require a regulator, we recommend the 23120-1/2-PP Poly Regulator for this purpose (see Related Products).
If you need to run either of these pumps continuously, we recommend running them at 40 psi (2.8 bar) or lower. Refer to the Heat Rise Chart (above).

Pump specifications for the Delavan 5850-111E Bypass Pump and the 5850-201E Demand Pump:

  • Max. Flow: 5.0 GPM (18.9 LPM)
  • Max. Pressure: 60 PSI (4.1 bar)
  • Max. Suction Lift: 14' (4.3 m)
  • Max. Draw: 16.3 Amps
  • Max. Fluid Temperature: 140 degrees Fahrenheit (60 degrees Celsius)
  • Port Sizes: 1/2" (13 mm) NPT female inlet and outlet
  • 5 chamber positive displacement diaphragm pump
  • Self-priming
  • Can be run dry
  • Polypropylene housing
  • Viton Valves, Santoprene diaphragm
  • Stainless steel fasteners
  • Weight: 8 lbs. (3.6 kg)
  • CE approved

Motor Specifications:

  • Motor Type: 12 VDC permanent magnet, totally enclosed, non-ventilated motor
  • Leads: 14 AWG, 6" (152 mm) long
  • Coated shell motor shell
  • Motor surface temperature should not be higher than 180 degrees Fahrenheit (82 degrees Celsius) because the motor is not equipped with thermal protection

Replaces FIMCO 5275088 and 5275704.

Please refer to the files located in Resources if you wish for more information on these 5800 Series PowerFLO diaphragm pumps by Delevan.

Related Products