Quick Teejet Hose Shank Nozzle Body w/ Top Check Valve
Quick TeeJet Hose Shank Diaphragm Check Valve Nozzle Body.
- Hose shank nozzle body.
- Can be used with Quick TeeJet Caps (see Related Products).
- Available in single hose or double hose connection.
- Max. Operating Pressure: 300 psi.
- Low profile design allows maximum protection against damage.
- Drip-free shutoff with TeeJet ChemSaver. Opens at 10 PSI. Standard EPDM diaphragm.
- Flow Rate at 5 PSI Pressure Drop: 2.25 GPM
- Flow Rate at 10 PSI Pressure Drop: 3.18 GPM
See below for boom clamps to fasten the nozzle bodies onto either square pipe or round pipe. This Nozzle body also comes with the check valve on the side, see Product Map on the side of the screen for link to that page.
Please note that the 3/4, 1/2 or the 3/8 refers to the inside diameter of the hose that you are attaching the nozzle body to.
If you are using 80 degree Teejet nozzles, you should have the nozzles bodies spaced 20" apart and 20" above the spraying surface for even coverage.
|TeeJet Part #||Type||To Fit Hose ID|