Overview
Stens Replacement OEM Xtreme PTO Clutches feature cool coil technology, bearing upgrades, Xtreme precision machined pulleys, and more for extended clutch life.
Xtreme Electric PTO Clutches for Toro Mowers
Prices are in US Dollars.
Overview
Stens Replacement OEM Xtreme PTO Clutches feature cool coil technology, bearing upgrades, Xtreme precision machined pulleys, and more for extended clutch life.
Product Description
These Stens Xtreme Electric PTO Clutches act as OEM replacements on various Toro mowers. They also can be used to replace Warner and Xtreme clutches. Refer to the chart below to find the proper clutch for your application.
These Stens Xtreme PTO Clutches come with a range of upgraded features that extend clutch life, including:
- Cool coil technology - runs over 20% cooler than competitive clutches. Electromagnetic clutches run very hot, up to around 220° F. Xtreme composite coils run around 175° F. Less heat means extended life.
- High temperature bearing upgrades OR FatBoy bearing upgrades - high temperature bearings use a special blend of grease rated two times more than what is required for extended bearing life. Since high temperatures and vibration are tough on bearings, all Xtreme clutches use this blend of high temperature grease for extended bearing life. FatBoy bearings have an increased size to improve bearing life. Since the number one failure in a lawnmower clutch is the pulley bearing, the FatBoy uses top grade bearings and a replaceable pulley bearing.
- Replaceable pulley bearings - since the pulley bearings can eventually wear out, the Xtreme design offers replaceable bearings (not all clutches have this feature).
- Super smooth "Xtreme Precision" machined pulleys - result in stronger, quieter, smoother performance, while maintaining stable and faster blade speeds. These type of pulleys are used on Nascar engines since they don't spread under load like cheaper formed pulleys. If a formed pulley spreads, the belt will sink deeper into the groove, lowering belt speed and slowing down blades.
- Integrated, watertight, impact-resistant wire harnesses - Xtreme clutches have integrated watertight connections with three layers of protection at the clutch body instead of flimsy plastic connectors with exposed wires.
Part # | Replaces Toro OEM # | Replaces Warner # | Replaces Xtreme # | ID | Pulley Diameter | Direction | Uses Belt Width |
---|---|---|---|---|---|---|---|
255-207X | 109-9282 / 116-1604 / 116-1620 Fits Z Master G3 Turbo Force (serial # 290000001-312999999) 48", 52", 60", 72" decks |
5218-207 | X0239 | 1 1/8" | 7 3/16" | Counterclockwise | 1/2" or 5/8" |
255-243X | 103-3131 / 103-3245 / 103-6590 Fits Z Master Z500, Z528, Z553 |
5218-100 5218-228 5218-243 |
X0257 | 1" | 7 3/16" | Clockwise | 1/2" or 5/8" |
255-323X | 116277 Fits 612-Z (serial # 1000001-1999999) ; 616-Z and 620-Z (serial # 100001-599999) ; 616-Z (serial # 390000001-499999999) ; Z118 (serial # 79000001-79999999) |
5210-34 5210-50 5215-88 |
X0196 | 1" | 5 5/16" | Clockwise | 1/2" or 5/8" |
255-331X | 94-6136 | 5218-10 5218-223 |
X0041 | 1 1/8" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-399X | 1-631644 / 1-631731 / 1-633098 / 1-641213 / 103-0500 / 103-0660 / 103-0661 / 103-0662 / 631644 / 631731 / 633098 / E631644 / E631731 / E633098 | 5218-21 5218-25 5218-76 5218-76C 5218-293 |
X0042 | 1" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-511X | 104-3334 Fits DH-150, DH-170, DH-190, DH-200, DH-210, DH-220, RZT480H (serial # 280000001-290999999) ; Timecutter 14-38Z, 16-38Z, 16-42Z, Z4200 (serial # 230000001-2409999999) ; Timecutter Z420 (serial # 250000001-270999999) ; Timecutter Z4220 and Z4202 (serial # 280000001-2909999999) ; ZD420 and ZD420T (serial # 260000001-311999999) |
5217-6 5217-7 5217-9 5217-35 |
X0003 | 1" | 5 3/8" | Counterclockwise | 1/2" or 5/8" |
255-519X | 93-3160 Fits 74140 and Proline 724-Z (serial # 590001-699999) |
5210-52 5215-62 5215-120 |
X0450 | 1 1/8" | 4 13/16" | Clockwise | 1/2" |
255-535X | 1-631645 / 1-633099 / 103-0664 / 631645 / 633099 / E633099 | 5218-5 5218-259 |
X0015 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-547X | 11346 / 99-8012 | 5210-33 5215-59 |
X0185 | 1" | 5 5/16" | Counterclockwise | 1/2" or 5/8" |
255-552X | 1-631732 / 103-0501 / 103-0665 / 631732 / E631732 | 5218-65 5218-65E 5218-213 |
X0049 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-560X | 1-653048 / 1-653292 / 103-0690 / 105-3630 / 109-2916 / 653048 / 653292 / E653048 / E653292 Fits Z Master Z400 (serial # 290000001-310999999) ; Z441 and Z449 (serial # 250000001-270999999) ; Z450 (serial # 2500000001-280999999) ; Z453 (serial # 2500000001-270999999) |
5218-44 5218-80 5218-80C 5218-201 5218-215 |
X0017 | 1" | 7 3/16" | Counterclockwise | 1/2" or 5/8" |
255-721X | 104-3624 / 109-7035 | 5219-13 | X0138 | 1" | 7 1/4" | Counterclockwise | 1/2" or 5/8" |
255-723X | 103-2453 / 103-3244 / 103-6589 / 109-7666 Fits Z Master Z550 (serial # 280000001-280999999) ; Z555 (serial # 240000001-250999999) ; Z558 (serial # 270000001-270999999) ; Z587L (serial # 240000001-240999999) |
5218-101 5218-217 |
X0460 | 1 1/8" | 7 1/8" | Clockwise | 1/2" or 5/8" |
255-727X | 103-3132 / 103-3246 / 103-4000 / 103-4057 / 103-5835 / 103-6579 / 109-7665 / 109-7673 / 116-1611 |
5218-99 5218-168 5218-202 5218-209 |
X0461 | 1 1/8" | 7 1/8" | Clockwise | 1/2" or 5/8" |
255-803X | 103-0281 / 103-1364 | 5218-73 | X0314 | 1 1/8" | 6 5/16" | Clockwise | 1/2" or 5/8" |
255-811X | 103-0011 / 103-0083 / 109-6626 / 109-6627 | 5218-161 5218-206 |
X0238 | 1 1/8" | 6 7/16" | Clockwise | Double A |
255-823X | 110-6766 Fits Time Cutter SS5000, SS5060, ZS5000, Z5020, Z5030, Z5035, Z5040, Z5060 ; Titan Z4800, Z5200, ZX5000, ZX5020 |
5219-81 | X0379 | 1" | 6 5/16" | Counterclockwise | 1/2" or 5/8" |