Overview

These Stens Electric PTO Clutches are designed for rugged use and made for residential and commercial applications, excellent on Husqvarna Mowers.

Electric PTO Clutches for Husqvarna Mowers

Electric PTO Clutch
USD $437.75
  • SKU: 255-331
Electric PTO Clutch
USD $392.12
  • SKU: 255-351
Electric PTO Clutch
USD $454.11
  • SKU: 255-359
Electric PTO Clutch
USD $350.44
  • SKU: 255-363
Electric PTO Clutch
USD $366.76
  • SKU: 255-511
PTO Clutch
USD $272.55
  • SKU: 255-515
Electric PTO Clutch
USD $400.49
  • SKU: 255-535
Electric PTO Clutch
USD $412.87
  • SKU: 255-547
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Sezzle
Prices are in US Dollars.

Overview

These Stens Electric PTO Clutches are designed for rugged use and made for residential and commercial applications, excellent on Husqvarna Mowers.

Product Description

These Stens Electric PTO Clutches are OEM spec and replaces Husqvarna PTO Clutches. They are designed for rugged use and made for residential and commercial applications. These PTO clutches have a One Year Warranty and are maintenance and adjustment free.

You must match up your existing PTO Clutch reference number exactly to the corresponding replacement Electric PTO Clutch. For proper ordering reference Husqvarna, Warner, or Ogura Part No. below in the chart.

Important:

If a clutch is mounted incorrectly then the springs will be run in compression and it will cause the springs to fail.

Generally, most applications that mount directly to the crankshaft use a counter clockwise rotation for standard mount (pulley away from engine). A clockwise rotation is normally used for reverse mounting (pulley towards engine).

In order for your PTO clutch to be installed properly you must torque correctly to prevent premature failure. You must allow both axial and radial free-play on the anti-rotation device. You must allow this free-play or resistance will be created resulting in field bearing failure. 

Part # Replaces
Husqvarna #
Replaces
Warner #
Replaces
Ogura #
ID HT Pulley
Dia.
Direction Uses Belt
Width
255-121 523 40 00-08 / 532 17 93-34 53464900 1" 3" 6" 1/2"
255-123 539 11 22-33 GT1A-HU02 1" 3 5/32" 5 5/16"
255-331 539 12 87-11 5218-10 1 1/8" 3 1/4" 5 3/8" Counter
Clockwise
1/2" or 5/8"
255-351 532 10 82-18 / 532 14 26-00 5215-51 1"
keyed
hub
4 1/4" 5 3/8" Counter
Clockwise
1/2"
255-359 532 10 62-28 / 532 14 09-23 /
532 14 45-09 / 532 17 00-56
5210-60 /
5215-73
1 1/8" 4" 5 3/8" Counter
Clockwise
1/2"
255-363 532 10 95-50 / 532 17 43-67 /
532 91 70-63
5215-134 1" 3 3/4" 6" Counter
Clockwise
1/2 or 5/8"
255-511 532 16 08-89 5217-6 /
5217-9 /
5217-35
1" 3" 5 3/8" Counter
Clockwise
1/2" or 5/8"
255-515 532 14 50-28 5217-2 /
5217-46
1" 3" 5 3/8" Counter
Clockwise
1/2"
255-535 539 10 26-03 / 539 10 95-80 5218-5 /
5218-259
1 1/8" 3 1/4" 6 5/16" Clockwise 5/8"
255-547 530 01 63-43 5210-33 /
5215-59 /
5215-107
1" 3 1/2" 5 11/32" Counter
Clockwise
1/2"
255-835 505 28 73-01 5219-108 1" 4" 5 3/8" Counter
Clockwise
1/2"

When mounting bolt and retaining washer and torque for the clutch follow these specs. for it to work properly.

  1. Use Grade 5 or Grade 8 bolt only

Minimum Torque:

  1. 7/16" UNF bolt is 50ftlb/67 Nm
  2. 3/8" UNF bolt is 31ftlb/42 Nm
  3. M10x1.5 bolt is 35ftlb/48 Nm

Anything less than required mounting torque could result in clutch failure, thus voiding warranty.

Related Products