Overview

Stens Replacement PTO Clutches for Great Dane Mowers, designed for rugged use and made for residential and commercial applications.

Electric PTO Clutch for Great Dane Mowers

Electric PTO Clutch
USD $249.08
  • SKU: 255-145
Electric PTO Clutch
USD $218.76
  • SKU: 255-146
Electric PTO Clutch
USD $345.03
  • SKU: 255-387
Electric PTO Clutch
USD $474.01
  • SKU: 255-552
Electric PTO Clutch
USD $461.38
  • SKU: 255-627
Order Now, Pay Later with
  • Privacy Guaranteed
  • Secure Payment
  • Visa
  • Mastercard
  • Amex
  • PayPal
  • PayPal
  • Amex
Prices are in US Dollars.

Overview

Stens Replacement PTO Clutches for Great Dane Mowers, designed for rugged use and made for residential and commercial applications.

Product Description

These Stens Electric PTO Clutches are OEM spec and replaces Great Dane PTO Clutches. They are designed for rugged use and made for residential and commercial applications. These PTO clutches have a One Year Warranty and are maintenance and adjustment free.

You must match up your existing PTO Clutch reference number exactly to the corresponding replacement Electric PTO Clutch. For proper ordering reference Great Dane & Warner Part Number below in the chart.

Part # Replaces
Great Dane OEM
Replaces
Warner #
ID HT Pulley
Diameter
Direction Uses Belt
Width
255-145 TCA14535 5219-32 1 1/8" 3" 6 5/16" Counterclockwise 5/8"
255-146 D38155 / GDA10017 5219-4 1" 3 1/4" 6" Counterclockwise 1/2" or 5/8"
255-387 D18000 5215-14 1" 3 1/2" 6" Counterclockwise 1/2" or 5/8"
255-552 180265 5218-65E
5218-213
1 1/8" 3 5/8" 6 5/16" Clockwise 5/8"
255-627 GDA10122 5218-31
5218-94
5218-169
1 1/8" 3 1/4" 6" Counterclockwise 1/2" or 5/8"

Important:

If a clutch is mounted incorrectly then the springs will be run in compression and it will cause the springs to fail.

Generally, most applications that mount directly to the crankshaft use a counter clockwise rotation for standard mount (pulley away from engine). A clockwise rotation is normally used for reverse mounting (pulley towards engine).

In order for your PTO clutch to be installed properly you must torque correctly to prevent premature failure. You must allow both axial and radial free-play on the anti-rotation device. You must allow this free-play or resistance will be created resulting in field bearing failure.

When mounting bolt and retaining washer and torque for the clutch follow these specs. for it to work properly.

  1. Use Grade 5 or Grade 8 bolt only

Minimum Torque:

  1. 7/16" UNF bolt is 50ftlb/67 Nm
  2. 3/8" UNF bolt is 31ftlb/42 Nm
  3. M10x1.5 bolt is 35ftlb/48 Nm

Anything less than required mounting torque could result in clutch failure, thus voiding warranty.

Related Products