The E-Series Lock, which locks one drive control lever, mounts permanently on the cage by sandwiching two plates on the cage. In the case of enclosed cabs, the locking plate is installed on the outside of the cab and the 3/16" thick mounting plate is put on the inside (this allows the glass to slide past it while operating the machine). A window must be open only while the lock is installed. See NOTE below. The E-Series Lock is permanently attached with 4 non-reversing stainless steel screws. The U-bar captures one drive control lever and locks into the locking plate (which is secured on the cage) therefore securing the machine.
Some models of Gehl and all of Belle skid loaders may not have holes in the protective cage below the drive controls. Additionally, some models of Caterpillar skid loaders with enclosed cabs (ONLY) may have stationary glass at drive control level. This may prohibit the Skidsteer Lock or E-Series Skidsteer Lock from being installed in the normal fashion. JCB Robot, Takeuchi and Thomas skid loaders cannot use the Skidsteer Lock, only the E-Series Skidsteer Lock may be used. The Skidsteer Lock or E-Series Skidsteer Lock may be installed in a manner to prevent the lap-bar from coming down prohibiting operation.
E-Series Lock Specifications
Weight: 9 lb
Box Size: 3" x 7" x 9"
Keyed Alike Locks
Make your equipment locks keyed-alike, so that one key will unlock everything. Just add it to your shopping cart when you order a lock. Mix and match is okay for keyed-alike equipment locks. Add a keyed-alike feature for each lock you order. When you order your locks keyed-alike you will be able to order more locks in the future and have them keyed-alike as well.
A theft can ruin your day. Stop the thieves cold with our equipment locks.