Annovi Reverberi AR403 Pump Accessories

Enhance your pumping experience with the Annovi Reverberi AR403 Diaphragm Pump with the accessories listed below.

The Annovi Reverberi Pressure Regulator is a pump mounted control unit that regulates working pressure in the distribution of sprayed liquids with your AR403 Diaphragm Pump.

Annovi Reverberi GR40 Pressure Regulator:

• Adjustable relief valve with glycerin-filled pressure gauge and bypass control lever
• Max. Flow Rate: 10.6 gpm
• Max. Pressure: 580 psi
• Max. Fluid Temperature: 140° F
• Port Sizes: Two 1/2" HB outlets, 5/8" HB bypass
• Weight: 2.6 lb.

Annovi Reverberi AR33082 Pressure Regulator:

• Adjustable relief valve with glycerin-filled pressure gauge and bypass control lever
• Max. Flow Rate: 10.6 gpm
• Max. Pressure: 580 psi
• Max. Fluid Temperature: 140° F
• Port Sizes: Two 1/2" HB outlets, 5/8" HB bypass
• Weight: 2.6 lb.
• Comes equipped onto the Annovi Reverberi AR403-GR3/4-GCI Diaphragm Pump

The Annovi Reverberi Gearboxes can be used to couple your AR403 Diaphragm Pump to either an 8-18 HP gas engine with a 1" keyed shaft or a 5-6.5 HP gas engine with a 3/4" keyed shaft. These 6:1 gear reducers can be used with 90 weight gear oil, which can be found in many hardware and automotive stores. Be careful not to put too much oil in the gearbox. The dipstick for the gearbox has a ridge near the bottom of the stick, do not fill past the ridge. The o-ring is already installed in the gear box (feel inside the ridge).

Annovi Reverberi AR1636 Gearbox:

• 6:1 gear reduction
• For attaching to 5-6.5 HP gas engines with 3/4" keyed shafts

Annovi Reverberi AR1666 Gearbox:

• 6:1 gear reduction
• 3/4" straight keyed shaft
• For attaching to 5-6 HP gas engines with 3/4" keyed shafts

The Male and Female PTO Shaft Kits can be used to drive your Annovi Reverberi AR403 Pump with a tractor PTO. The 1" Solid Shaft Kit allows you to install a 1" solid shaft with keyway onto the pump if you plan on driving the pump with an electric motor and / or belt and pulley system.

Annovi Reverberi AR43831 / Hypro 9910-KIT1704 1 3/8" Female PTO Shaft Kit:

• 1 3/8" 6-splined female PTO shaft kit
• Includes female PTO coupler and retaining clamp, torque arm, mounting bracket, chains, and necessary hardware

Hypro 9910-KIT2200:

• 1-3/8" 6-spline Male PTO Shaft Kit
• Includes male PTO shaft adapter, mounting bracket, and necessary hardware

Hypro 9910-KIT2202:

• 1" Solid Shaft Kit
• Includes male PTO shaft adapter, mounting bracket, and necessary hardware

Annovi Reverberi AR43397 Hydraulic Motor Flange Kit:

• Fits SAE 2-bolt 'A' flange motors with 1" shafts