Teejet Adjustable Conejet Nozzle
This nozzle is adjustable from a straight stream to a hollow cone simply by twisting the nozzle. This ADJUSTABLE Conejet nozzle is constructed of brass to provide a long lifespan. Rittenhouse stocks several sizes of this nozzle. If you order any of the other versions of the adjustable conejet nozzles, please allow an extra 7 to 10 days for delivery.
The higher the nozzle number the greater the flow. To find out the flow rates of the nozzles please see the performance chart below.
Adjustable Conejet nozzles are very useful when spraying herbicide or pesticide because when the nozzle is in its straight steam pattern, you can target spray better. You can use this nozzle on a spray gun or in a spray boom.
These nozzles are also very popular in the pest control industries. The knurled body of the tip rotates through a half turn to provide spray selection from a wide angle, finely atomized cone spray to a straight stream spray ... or anywhere in between. Thus, a very versatile spray nozzle.
The thread is the Teejet standard cap thread and can be used on the end of Teejet brass spray wands, or inlet nozzle bodies, see 'Related Products'. If you need to adapt the Conejet to something other than a Teejet brass wand or nozzle body, order either the Female or Male inlet nozzle body. That will give you an NPT thread, see 'Related Products.'
Please review the Adjustable ConeJet Nozzle Capacity Chart in Resources for more info.
Spraying Systems Co.
|Part #||MAX GPM AT(30 PSI)||MAX. Throw-Ft At (30 PSI)|
|5500-X1||.015 - .061 GPM||1 - 22 Ft|
|5500-X2||.03 - .11 GPM||1.5 - 26 Ft|
|5500-X3||.045 - .17 GPM||2 - 30 Ft|
|5500-X4||.058 - .22 GPM||2.5 - 33 Ft|
|5500-X5||.076 - .26 GPM||2.5 - 34 Ft|
|5500-X6||.087 - .32 GPM||3 - 3.5 Ft|
|5500-X8||.12 - .40 GPM||3 - 37 Ft|
|5500-X10||.15 - .52 GPM||3.5 - 38 Ft|
|5500-X12||.18 - .60 GPM||4 - 39 Ft|
|5500-X14||.20 - .67 GPM||4 - 40 Ft|
|5500-X18||.26 - .84 GPM||4 - 41 Ft|
|5500-X22||.32 - 1.0 GPM||4.5 - 41 Ft|
|5500-X26||.37 - 1.2 GPM||5 - 42 Ft|