Turbo TeeJet Induction Flat Spray Nozzle TTI11004VP-CE with Cap Assembly

Brand new for the 2017 spraying season, we are offering this Turbo TeeJet Induction Flat Spray Nozzle TTI11004VP-CE with Cap Assembly for all your spraying needs.

This TTI11004VP-CE TeeJet nozzle shares the same exact features as the TTI11004VP, only it is equipped with a Quick TeeJet Cap and gasket. It is made with polymer for excellent chemical and wear resistance and is Visiflo-color coded (red) for easy identification. Use this flat spray nozzle to handle a variety of chemicals, such as soil applied and systemic herbicides, as well as systemic fungicides and insecticides. Depending on whichever chemical you choose, this broadcast spray nozzle produces large air-filled droplets through a Venturi air aspirator which results in drift reduction.

The United States EPA recently approved two new Dicamba-based herbicides for over-the-crop application in soybeans and cotton: XtendiMax by Monsanto and Engenia by BASF. The approval included specifications of the TTI11004-VP Turbo TeeJet Induction Nozzle as the only spray nozzle approved for this new application of XtendiMax and Engenia, mainly from the nozzle's ability to generate extremely low levels of driftable droplets that were required for the success of this new formulation.

Monsanto anticipates a widespread adoption of XtendiMax across the United States in the near future, and the extensive field testing done has shown that the TTI11004-VP Turbo Induction Broadcast Nozzles provide exceptional drift control and weed control efficacy with XtendiMax.

Strainer Recommendations:

• 50 mesh strainer for TTI11004VP-CE

Features:

• 110° wide angle spray angle
• Tapered flat spray pattern
• Operating Range: 15-100 PSI
• Polymer construction for chemical and wear resistance
• Visiflo-color coded for easy identification
• Orifice design minimizes plugging
• Compact size prevents tip damage
• Pre-orifice is removable
• Perfect for use with automatic sprayer controllers
• Recommended to space the nozzles 20" apart

See the Resources section for the capacity chart and more information about these Turbo TeeJet TTI Induction Flat Nozzles with cap.

Pulse Width Modulation (PWM):

Make every drop count with your PWM control. PWM spray tip control systems, like DynaJet, use a PWM valve located at the nozzle body to adjust spray tip flow rate when changes in speed are detected. Spray tips paired with PWM controls are serving two main purposes: the formation of the spray pattern and droplet size. Target droplet size selection should be based on providing enough coverage for proper pest control while balancing out the need for drift management.

With air induction tips, air is mixed with water through a venturi air aspirator that produces large air-filled droplets. When a PWM valve is used together with certain air induction tips, the mixing chamber and air inlet can fill with water as the PWM valve cycles. This can then result in water escaping out the air inlet holes, which can lead to poor distribution. New designs in air-induction tips have been proven to work well with PWM valves and nozzle control systems.

Based on a combination of field and laboratory testing, PWM approved spray tips must meet the following criteria at a variety of duty-cycles:

• Excellent spray distribution across the boom
• Skip-free application
• Excellent spray distribution in the direction of travel
• Rapid and complete spray pattern formation
• Droplet size consistency