TeeJet Air Induction Turbo TwinJet Broadcast Nozzles

Get superior crop coverage and penetration with excellent drift control while spraying a variety of agricultural liquids with these TeeJet Air Induction Turbo TwinJet Broadcast Spray Nozzles.

The combination of a dual symmetric 110° flat fan pattern and a 60° angle between spray pattern in addition to the greater number of droplets results in superior crop coverage and penetration, while providing excellent drift control. The design on these twin style flat fan spray tips make them best suited for broadcast spraying where superior leaf coverage and canopy penetration are important. Ideal for applying herbicides, pesticides, insecticides, fungicides, and agricultural chemicals in applications involving agricultural spraying, weed control, pest control, insect control, and more.

Automatic spray alignment with Quick TeeJet cap and gasket 114443A-*-CELR (02 to 06).

Strainer Recommendations:

• 100 Mesh Strainer for AITTJ60-11002VP to AITTJ60-110025VP
• 50 Mesh Strainer for AITTJ60-11003VP to AITTJ60-11015VP

Features:

• Dual tapered edge spray tips with air-induction technology
• Spray Angle: 110°
• Spray Pattern: Twin flat fan pattern sprays 60° apart (one in forward direction of travel, the other in the aft)
• Material: Polymer
• Recommended Pressure Range: 20-90 psi
• Optimum Spray Height: 20" with 20" spacing
• Produces less driftable fine droplets than a standard flat fan spray tip
• Excellent drift control
• Color coded for easy flow rate identification
• Pulse Width Modulation (PWM) approved

Pulse Width Modulation (PWM):

Make every drop count with your PWM control. PWM spray tip control systems, like DynaJet, use a PWM valve located at the nozzle body to adjust spray tip flow rate when changes in speed are detected. Spray tips paired with PWM controls are serving two main purposes: the formation of the spray pattern and droplet size. Target droplet size selection should be based on providing enough coverage for proper pest control while balancing out the need for drift management.

With air induction tips, air is mixed with water through a venturi air aspirator that produces large air-filled droplets. When a PWM valve is used together with certain air induction tips, the mixing chamber and air inlet can fill with water as the PWM valve cycles. This can then result in water escaping out the air inlet holes, which can lead to poor distribution. New designs in air-induction tips have been proven to work well with PWM valves and nozzle control systems.

Based on a combination of field and laboratory testing, PWM approved spray tips must meet the following criteria at a variety of duty-cycles:

• Excellent spray distribution across the boom
• Skip-free application
• Excellent spray distribution in the direction of travel
• Rapid and complete spray pattern formation
• Droplet size consistency