Overview
General Pump Pressure Cleaning Triplex Plunger Pump - TP2530J34
Overview
Product Description
The General Pump / Interpump Triplex Plunger Pump TP2530J34 is commonly used for high pressure washing applications. Variations of this model pump are used on the Kodiak XR6500G, XR7500G, and HWDE3025F Pressure Washers.
These TP Series 51 Triplex Plunger Pumps by General Pump are perfect for all general cleaning applications, including surface cleaning, deck cleaning, driveway and sidewalk cleaning, household exterior cleaning, and much more.
Features:
- Forged brass manifold
- Triplex plunger pump
- Oil bath crankcase made of die cast anodized aluminum
- Solid ceramic plungers with continuously lubricated packings
- Original Interpump unitized, stainless steel, K01 inlet and outlet valves
- Comes standard with SAE J609 gasoline engine mounting flange
Specifications:
- Max. Flow: 2.88 GPM (10.9 LPM)
- Max. Discharge Pressure: 2500 PSI (172 BAR)
- Max. Inlet Pressure: 125 PSI (8.6 BAR)
- Max. Pump Speed: 3400 RPM
- Max. Inlet Vacuum: 3' water (0.9 m)
- Max. Fluid Temperature: 165 degrees Fahrenheit (74 degrees Celsius)
- Min. Power Requirements: 7.4 GHP
- Hollow Shaft Inside Diameter: 3/4" (19 mm)
- Flanged for direct couple to gas engine
- Inlet Port Thread: 3/8"-19 BSPP-F
- Discharge Port Thread: 1/4"-19 BSPP-F
- Bore: 0.591" (15 mm)
- Stroke: 0.283" (7.2 mm)
- Crankcase Oil Capacity: 11.0 ounces
- Dimensions: 7" x 7.2" x 5.5" (17.8 cm x 18.3 cm x 14 cm)
- Weight: 11.4 lbs. (5.2 kg)
Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Non-detergent SAE 30W oil. Change oil after 40-hour break in period, then every three (3) months or 500 hour intervals thereafter.
Check Resources for the manual and parts list for this pump.
General Pump is a member of the Interpump Group.
