Overview
General Pump Pressure Cleaning Triplex Plunger Pump - T9211
Overview
Product Description
The General Pump / Interpump Triplex Plunger Pump Model T9211 with nickel-plated forged brass manifold is commonly used for high pressure washing applications. Variations of this model pump are used on the Kodiak XR12000E Pressure Washers.
These T Series 47 S Triplex Plunger Pumps from General Pump / Interpump are the preferred pump frames in the pressure cleaning industry. They can also be used in industrial applications, chemical spraying, oil rigs, mining, marine applications, and more.
Heavy duty tapered roller bearings and oversized connecting rods help maximize the pump life when used with a variety of chemicals.
Features:
- Forged brass manifold
- Triplex plunger pump
- Large capacity, die cast, anodized aluminum oil bath crankcase
- Heavy duty tapered roller bearing
- Solid ceramic plungers with continuously lubricated packings
- Oversized connecting rods for maximum life
- Unitized stainless steel inlet and discharge valves
Specifications:
- Max. Flow: 4.2 GPM (15.9 LPM)
- Max. Discharge Pressure: 3000 PSI (207 BAR)
- Max. Inlet Pressure: 125 PSI (8.6 BAR)
- Max. Pump Speed: 1750 RPM
- Max. Fluid Temperature: 165 degrees Fahrenheit (74 degrees Celsius)
- Min. Horsepower Required: 8.0 BHP (12.0 for gas engines)
- Max. Inlet Vacuum: 9' (2.7 m) water
- Shaft Diameter: 0.945" (24 mm)
- Inlet Port Thread: 1/2"-14 BSPP-F (13 mm)
- Discharge Port Thread: 3/8"-19 BSPP-F (9.5 mm)
- Bore: 0.787" (20 mm)
- Stroke: 0.394" (10 mm)
- Crankcase Oil Capacity: 37.2 ounces (1.05 kg)
- Dimensions: 12.6" x 9.2" x 6.9" (320 mm x 234 mm x 175 mm)
- Weight: 32 lbs. (14.5 kg)
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Non-detergent SAE 30W oil. Change after 40-hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Check the Resources section for the manual for this pump, as well as a technical data sheet.
General Pump is a member of the Interpump Group.
