Accu-Brand Dura Loop Stainless Steel Hose Hangers

Accu-Brand Dura Loop Stainless Steel Hose Hangers are made with 304 stainless steel, making them strong, durable, and long lasting in industrial, home and marine environments. All of these Accu-Brand Dura Loop Hose Hangers are made in the USA.

The Accu-Brand Dura-Loop Small Stainless Steel Hose Hanger (# 018A306) has a weight capacity of 200 lbs. It can hold up to 100' of 1/2" O.D. hose. It works best with electrical cords. The Dura-Loop Small Stainless Steel Hose Hook is made of 304 stainless steel. This makes it durable, strong and suitable for home, industrial, and marine environments. Its dimensions are 6.5" tall x 3" wide x 5 3/4" deep.

The Accu-Brand Dura-Loop Large Stainless Steel Hose Hanger (# 018A307) is comprised of 304 stainless steel. It mounts with two stainless steel screws (included). The mounting holes are 5/16" and are on a 5 3/4" center. It has a capacity of 200 lbs. and can hold up to 100' of 3/4" O.D. hose. The Dura-Loop Large Hose Hanger is 8.5" tall x 8" wide x 8" deep.

The Accu-Brand Dura-Loop Saddle Hose Hanger (# 018A400) is the largest of the Dura-Loop Stainless Steel Hose Hangers. It can hold up to 100' of 1 1/4" outside diameter hose. In marine environments, this hose hanger will not rust or wear quickly. It is also used in garages, utility rooms, work areas and on outside walls. It mounts with two stainless steel screws (included).

The Accu-Brand Dura-Loop Stainless Steel Tilt Hose Hanger (# 020A310) is a wall-mounted hose hanger that can hold approximately 100' of 3/4" O.D. hose. It is Dura-Loop's most innovative and adjustable garden hose hanger, capable of adjusting to three different positions so you can remove your garden hose easier, something many hose hangers cannot offer. With the Dura-Loop Tilt Hose Hanger, you can store your garden hose in an upright position (excellent for storing hoses while not in use), a 45° position (allowing you to easily remove the hose with a few loops at a time), and a down position (great for sliding the entire hose off the hanger with no heavy lifting required). Not only can this hose hanger adjust to three positions, but it can also pivot 60° right and left, which makes it easier to remove the hose while standing on the side of the hanger. The dimensions for the Tilt Hose Hanger are 13" tall x 5" wide x 5" deep.